New and Used Blocks For Sale

Good, used block from a Mack E7-300 engine. The block has been visually inspected and is in good working condition. The block has minor rust on the exterior. The bolt holes are clean and clear from obstruction. The fittings are in good working condition. The casting number is 239GB5551M. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block stiffener strengthen plate from a Volvo D12 engine. The block stiffener strength plate has been inspected and seems to be in good condition. There is not visible damage on the block stiffener plate. There is minor rust seen on the block stiffener plate. All bolt holes are clean and clear from obstructions. The block stiffener plate casting number is 3183414. The engine serial number is D12D*95120072. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a Caterpillar 3208 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is minor rust seen on the outside of the block and inside the cylinders. The cylinders honing marks are partially visible. The casting number is 9N3758. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a International Maxxforce 7 twin turbo engine. The block has been visually inspected and is in good working condition. One of the sensors has been broken off, refer to photos. The block has minor rust and corrosion on the exterior. The bolt holes are clean and clear from obstruction. The casting number is 1885870C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Volvo D13 Cylinder Block, Visual Inspection Only, Cast # 1002123, Part # 21718835 (Replaces 21048297). All Cylinder Blocks sold with a 30 day “parts only” warranty. In the event of failure, the Cylinder Block will be replaced or a refund will be issued. Warranty does not include labor or progressive damage.

Good, used engine block from a Caterpillar 3176 engine. The block has been visually inspected and is in good working condition. There is minor visible damage seen on the top of the block, see photos. There is rust seen in a few cylinders in the block. The honing marks are partially visible. There is rust seen on the outside of the block. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Cummins ISL engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. The casting number is 4939084. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Maxxforce DT Cylinder Block, Visually Inspected, Cast #s 1888689C1, 1882060C1, 1888690C1, 1882061C1, All Cylinder Blocks sold with a 30 day “parts only” warranty. In the event of failure, the Cylinder Block will be replaced or a refund will be issued. Warranty does not include labor or progressive damage.

Good, used block stiffener strengthen plate from a Volvo D12 engine. The block stiffener strength plate has been inspected and seems to be in good condition. There is not visible damages on the block stiffener plate. There is minor rust seen on the block stiffener plate. All bolt holes are clean and clear from obstructions. The block stiffener plate casting number is 3183414. The engine serial number is D12521534D2AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a VT365 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear from obstructions. The contacts are in good working condition. The casting number is 1838258C4. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually Inspected, used block from a Mack E7 engine. Application, miles, or hours are all unknown. The casting number is 239GB5536M. The front most cam bearing has come loose, but the block appears to be in good condition otherwise. There appears some small internal cracks as well, but these may be normal for this block's design. Honing marks are visible in all cylinders, up to about the top 1 1/4". See all photos and look for yourself. Call or message us if you have any questions. We can ship Anywhere. Thank you.

Good, used engine block from a Detroit 6-71 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the exterior of the block. The casting number is 8925677. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

DD13 EPA07 (471901) Cylinder Block, Cast # R47102, Visually Inspected, 1 Small Broken Bolt on P-Side Rear Section. All Cylinder Blocks sold with a 30 day “parts only” warranty. In the event of failure, the Cylinder Block will be replaced or a refund will be issued. Warranty does not include labor or progressive damage.

Good, used block stiffener strengthen plate from a Cummins ISB 6.7 engine. The block stiffener strength plate has been inspected and seems to be in good condition. There is minor dent on the block stiffener plate. There is minor corrosion seen on the block stiffener plate. All bolt holes are clean and clear from obstructions. The block stiffener plate casting number is 3965764. The engine serial number is ACEXH0408BAH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block stiffener strengthen plate from a Cummins ISB 220 engine. The block stiffener strength plate has been inspected and seems to be in good condition. There is minor corrosion seen on the block stiffener plate. All bolt holes are clean and clear from obstructions. The block stiffener plate casting number is 3965764. The engine serial number is 8CEXH0408BAC. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used engine block of a Maxxforce DT 466 engine from a 2009 International PB105 bus. Casting numbers seen are 1878591C1, 1873075C2, 1872902C2. Serial number is 466HM2U3025441. Block has been carefully inspected and all bearing surfaces look good. Honing marks are clearly visible in all of the cylinder bores. See phots and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used engine block of a Maxxforce DT 466 engine from a 2009 International PB105 bus. Casting numbers seen are 1878591C1, 1873075C2, 1872902C2. Serial number is 466HM2U3025438. Block has been carefully inspected and all bearing surfaces look good. Honing marks are clearly visible in all of the cylinder bores. See phots and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a Detroit DD15 engine. The block has been visually inspected and is in good working condition. There is no visible damage to the block. The contacts are in good working condition. There is no damage to the fittings. The bolt holes are clean and clear from obstruction. There is minor rust and paint chipping on the exterior of the block. The casting number is 47207. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

2011 Maxxforce DT Cylinder Block, Requires Approx. 0.010 Liner Shims, Visual Inspection Only, Pitting Spots On Upper Cylinder Bores - Above Liner Seats, Small Broken Bolt on Passenger Side, Cast#s 1888689C1, 1888690C1, 1882060C1, 1882061C1, All Cylinder Blocks sold with a 30 day “parts only” warranty. In the event of failure, the Cylinder Block will be replaced or a refund will be issued. Warranty does not include labor or progressive damage.

Good, used engine block from a Caterpillar C10 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen in a few cylinders in the block. The honing marks are visible. There is rust seen on the outside of the block. The casting number is 162-0681. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from an International DT466E engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. The honing marks are visible in the cylinders. The casting number is 1830279C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Cummins ISB 6.7 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. The block has minor rust and paint chipping on the exterior. There is a engine oil check tube attached to the block. The bolt holes are clean and clear from obstruction. The casting number is 81-04-065. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a Mercedes OM926 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust and corrosion on the exterior of the block. There is a oil check tube attached. The bolt holes are clean and clear from obstruction. The contacts and fittings are in good working condition. The casting number is R9060115101. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a International twin turbo Maxxforce 7 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. The block has minor rust and corrosion on the exterior. The contacts are in good working condition. The bolt holes are clean and clear from obstruction. The casting number. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

2009 ISL G (CNG - Compressed Natural Gas) Cylinder Block, Visually Inspected, Cast # 4936028, Part # 4946853, 5293397, 4993498, 3971389. All Cylinder Blocks sold with a 30 day “parts only” warranty. In the event of failure, the Cylinder Block will be replaced or a refund will be issued. Warranty does not include labor or progressive damage.

Good, used block from an International Maxxforce DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust on the exterior of the block. The bolt holes are clean and clear from obstruction. The casting number is 1002091. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used cylinder block from a Volvo D13 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are still visible in cylinders. The casting number is 1002091. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a John Deere 5030 engine. The block has been visually inspected and seems to be in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible. The casting numbers are R522413. The engine serial number is PE5030Z007066. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, good used Detroit Diesel DD15 block from unknow application. Casting number is R427 02. Other numbers found appear to be ZGS 007 and there is also 6J 108, but these are difficult to make out. Block has been carefully inspected and appears to be in good condition. All bearing surfaces look good and honing marks are clearly visible in all cylinders. See photos and give us a call or email if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a Ford 7.8L engine. The block has been visually inspected and is in good working condition. The block has minor rust and corrosion on the exterior. The bolt holes are clean and clear from obstruction. There is no visible damage to the block. The casting number is E5HN-6015-AC. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Volvo D7 Bare Block, Engine Serial # D70117925, this engine was disassembled because it was a weak runner. Block casting # 1001794 Block has been inspected, Standard Bore. Please see pictures, call or email with any questions.

Visually inspected, good used engine block of a Maxxforce DT 466 engine. Casting numbers seen are 1878591C1, 1873075C2, 1872902C2. Serial number is 466HM2U3028648. Block has been carefully inspected and all bearing surfaces look good. Honing marks are clearly visible in all of the cylinder bores. See phots and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from an International Maxxforce DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is 466HM2U3046303. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used, visually inspected Block from a Mack E7 engine. Application, year, miles and/or hours are all unknown. Block has been inspected and all bearing surfaces look good. There are honing marks visible in all cylinders, indicating life remaining in this block. Casting number is 239GB5551M. See photos and feel free to call or message us with any questions. We can ship Anywhere! Thank you.

Good, used block from an International Maxxforce DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a GM/Chev 6.6L Duramax engine off of a 2007 Chevrolet Express truck. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Cylinders may need to be honed. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a GM/Chev 6.6L Duramax engine off of a 2003 GMC C5500 truck. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1002091. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from an International DT360 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from an International Maxxforce DT engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. There are no visible honing marks in the cylinders. The casting number is 1878591C3. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from an International Maxxforce DT engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. There are no visible honing marks in the cylinders. The casting number is 1882661C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Cummins ISB 6.7L engine. The block has been visually inspected and is in good working condition. The block has no visible damage. The oil check tube is attached. The bolt holes are clean and clear from obstruction. There is minor rust and paint chipping on the exterior of the block. The casting number is 3971030. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from an International Maxxforce DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, good used Block from a 2011 Maxxforce 13 engine. Casting number seen on block is 51.01101-3428. I can't see a traditional number with the C in it anywhere. Block is in fair condition and there is some wear shown in the honing mark area of piston travel. See photos and feel free to call or email us for a quote. We can ship anywhere. Thank you.

Good, used cylinder block from a Mack E7 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. The honing marks are visible in the cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a CAT C13 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are still visible in cylinders. The casting number is 200-2052. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Mercedes OM460 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is A 460 011 02 01. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a Volvo D13 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. The cylinders need to be cleaned and re-honed. The casting number is 1002091. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine block from a Caterpillar D315 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the exterior of the block and in some cylinders. The casting number is 7F5545. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, good used block from a 2008 Mitsubishi FE83D truck. The engine Model is unknown, but the casting number is 7831N with a small 2 after it on the block. The engine serial number is ME227483. This is an overhead cam engine, so there are no cam bearings in this block to inspect. The main bearing surfaces all look good. Honing marks are visible in all four cylinders. See photos and call if you have any questions. We can ship Anywhere! Thank you.

Good, used engine block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the block. The casting number is 187420. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the block. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust on the exterior of the block. The bolt holes are clean and clear rom obstruction. The casting number is 1002133. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Cummins ISB 6.7 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. The block has minor rust and paint chipping on the exterior. There is a engine oil check tube attached to the block. The bolt holes are clean and clear from obstruction. The casting number is 4990443. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a GM/Chevy 6.6L engine. The block has been visually inspected and is in good working condition. There is minor damage to a contact and one of the bolts in the top of the block is loose, refer to photos, There is minor rust and corrosion on the exterior of the block. The casting number is not visible. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 1878591C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from an International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. The casting number is 1878591C3. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, Used condition engine block of a 2000 International DT 466. All of the cylinder liners are missing from this block, so we have no indication of wear. The bearing surfaces do have some discoloration as well. See photos and feel free to call or email us for a quote. We can ship Anywhere. Thank you.

Good, used cylinder block from a Ford 7.3 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a Ford 7.3 engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a GM/Chev 6.5L engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder block from a Mercedes 2.7L engine. The cylinder block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is minor rust seen on the outside of the block. Honing marks are visible in cylinders. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block stiffener strengthen plate from a Volvo D12 engine. The block stiffener strength plate has been inspected and seems to be in good condition. There is not visible damages on the block stiffener plate. There is minor rust seen on the block stiffener plate. All bolt holes are clean and clear from obstructions. The block stiffener plate casting number is 3183414. The engine serial number is D12521534D2AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, good used Isuzu 4HE1-xs block from a 1999 Isuzu NPR-HD truck. Engine serial number is unknown, but a casting number found on the block is 98616. Block has been carefully inspected and the bearing surfaces all look good. Honing marks are not easily visible within the cylinders. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

MACK CH613: HOOD $2250, DOORS $750 EA, AIR TANKS $200 EA, FUEL TANK $550, BATTERY BOX $250, ECM $750, BLOCK $1000, CRANK $1000, HEAD $500 EA. Please keep me in mind for future purchases.  I have about 3.5 acres of heavy Trucks and Parts.  Below is my local contact information. We have many engine parts and engines. Turbos, manifolds, heads, ECM's, gears, timing covers, clutch housing, etc. Call For Pricing We sell a full line of Heavy Duty Truck Parts: Cabs, Hoods, Engines, Transmissions, Front Axles, Differentials, etc... Call us we have what you are looking for! Thanks, Tony Delauto Used Truck Parts, Inc 14710 S. State Road 29 Felda FL 33930 Shop 863/675-7788 Cell 305/495-7973

Good, used block from a Hino J05D engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear rom obstruction. The casting number is not visible. The engine serial number is unavailable. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you for looking.

Paccar MX13 Cylinder Block - Used - With pistons, connecting rods, camshaft and Crankshaft - Casting Number: 965294 - Serial Number: 1897224 - Explore our efficient and economical global shipping rates. If you have any questions or need more information, please don't hesitate to contact us through a call, email, or text.

Good, used block from a International DT466 engine. The block has been visually inspected and is in good working condition. There is no visible damage to the block. There is minor rust and paint chipping on the exterior of the block. The bolt holes are clean and clear from obstruction. The casting number is 187420. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Visually inspected, good used Block of a Cummins Big Cam engine. There is no visible damage seen on the Block. There is rust seen on the outside of the block. Honing marks are still visible in cylinders. The casting number is 3011940. The engine serial number is 20425. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine block from a Caterpillar C10 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the block. The casting number is 162-0681. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, good used block from a Caterpillar 3208 engine. Year and application is unknown, nor are the miles or hours on this block. Honing marks are not visible in this block and one cylinder is showing more than average wear at the top of piston travel. See all photos and feel free to call or email us with any questions. We Ship Anywhere!! Thank you for looking.

Visually inspected, good used block of a Cummins ISB 5.9 Liter engine. Honing marks are visible in all six cylinders indicating engine was well maintained. Casting number seen on block is 81-04-010 and serial number is 56602349. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you for looking.

Good, used block from an International Maxxforce 13 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. There is rust seen on the outside of the block. Honing marks are visible in the cylinders. The casting number is 3012887C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Mercedes OM 460 LA (460975) EPA 07, MBE4000 Cylinder Block, Visual Inspection Only, Requires Approx. 0.15 mm Liner Shims, One Cylinder Head Dowel Pin Needs To Be Replaced, Cast# A4600110201, All Used Engine Parts Sold With a 30 Day “Parts Only” Warranty. In The Event Of Failure, The Used Engine Part Will Be Replaced Or A Refund Will Be Issued. Warranty Does Not Include Labor Or Progressive Damage. ALL CORES SOLD AS-IS.

Good, used block from Detroit DD15 engine. The block has been visually inspected and is in good working condition. There is minor rust on the exterior. The bolt holes are clean and clear from obstruction. The contacts are in good working condition. There is no visible damage to the block. The casting number is 47207. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. There is minor rust on the exterior of the block. The bolt holes are clean and clear from obstruction. There is no visible damage to the block. The casting number is 22802. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Cummins ISB engine. The block has been visually inspected and is in good working condition. The block has no visible damage. The block has minor rust and paint chipping on the exterior. There is a engine oil check tube attached to the block. The bolt holes are clean and clear from obstruction. The casting number is not visible. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used engine block from a Paccar MX13 EPA 13 engine. The block has been visually inspected and seems to be in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is minor rust seen on the block. The casting number is 965294. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine block from a Detroit DD15 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the block. The casting number is R47203. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a twin turbo International Maxxforce 7 engine. The block has been visually inspected and is in good working condition. The block has minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear from obstruction. One of the contacts on the exterior is broken. The casting number is 1885870C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Visually inspected, International DT466 engine block from an unknown truck. The casting number is 1878591C1. The engine serial number is not available. All of the bearing surfaces look good. Honing marks are clearly visible on all of the cylinders. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo D11 engine. The block has been visually inspected and is in good working condition. There is no visible damage seen on the block. The honing marks are visible. There is rust seen on the outside of the block. The casting number is 10021081928. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you

2008 MACK MP7- BLOCK $1000.00 ENGINE COMPLETE $4500 OR FOR PARTS WITH CORE CAMSHAFT $1000 TURBO $900 BLOCK $1000 CRANKSHAFT $1000 CYLINDER HEAD $1000 ECM $1000 COMPRESOR $400 CALL FOR MORE INFORMATION We have many engine parts and engines. Turbos, manifolds, heads, ECM's, gears, timing covers, clutch housing, etc. Call For Pricing We sell a full line of Heavy Duty Truck Parts: Cabs, Hoods, Engines, Transmissions, Front Axles, Differentials, etc... Call us we have what you are looking for! Delauto Used Truck Parts, Inc 14710 S. State Road 29 Felda FL 33930

FLYWHEEL HOUSING $350 TURBO $350 MANIFOLD $150 BLOCK $900 CRANK $900 HEAD $600 INJECTORS(EACH) $100 We have many engine parts and engines. Turbos, manifolds, heads, ECM's, gears, timing covers, clutch housing, etc. Call For Pricing We sell a full line of Heavy Duty Truck Parts: Cabs, Hoods, Engines, Transmissions, Front Axles, Differentials, etc... Call us we have what you are looking for! Thanks, Tony Delauto Used Truck Parts, Inc 14710 S. State Road 29 Felda FL 33930

Good, used block from a Twin turbo International Maxxforce 7 engine. The block has been visually inspected and is in good working condition. The block has minor rust and corrosion on the exterior. The contacts are in good working condition. The bolt holes are clean and clear from obstruction. The casting number is 1885870C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used Block from a Mercedes MBE900 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust and paint chipping on the exterior of the block. The casting number is no visible. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Visually inspected, used Mack E7 engine block from an unknown year truck. The casting number is 7E-2968. The engine serial number is not available. The honing marks are visible in all of the cylinders. All of the bearing surfaces look good. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Ford 7.8L engine. The block has been visually inspected and is in good working condition. There is minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear from obstruction. The casting number is E5HN6015-AE. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Mercedes MBE900 engine. The block has been visually inspected and is in good working condition. There is minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear from obstruction. The casting number is R9060115101. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Visually inspected block of a Mercedes OM926 engine. Application, mileage and hours all unknown. Honing marks are clearly visible in all cylinders. All bearing surfaces also look good. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you for looking.

MACK E7 BLOCK Thank you for contacting me.  Please keep me in mind for future purchases.  I have about 3.5 acres of heavy Trucks and Parts.  We have many engine parts and engines. Turbos, manifolds, heads, ECM's, gears, timing covers, clutch housing, etc. Call For Pricing We sell a full line of Heavy Duty Truck Parts: Cabs, Hoods, Engines, Transmissions, Front Axles, Differentials, etc... Call us we have what you are looking for! Thanks, Tony Delauto Used Truck Parts, Inc 14710 S. State Road 29 Felda FL 33930

Mercedes Engine OM460LA 435 HP Year 2003. Ran but used oil. Will sell for Parts. Heads $350 each Block $1500 Crank $850 Injectors $150 each Air Comp $350 Pow. Steer Pump $250 Turbo $700 Oil Pan $400 ECM $650 Thank you for contacting me. Please keep me in mind for future purchases. I have about 3.5 acres of heavy Trucks and Parts. We have many engine parts and engines. Turbos, manifolds, heads, ECM's, gears, timing covers, clutch housing, etc. Call For Pricing We sell a full line of Heavy Duty Truck Parts: Cabs, Hoods, Engines, Transmissions, Front Axles, Differentials, etc... Call us we have what you are looking for! Thanks, Tony Delauto Used Truck Parts, Inc 14710 S. State Road 29 Felda FL 33930

Good, used engine block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. The bolt holes are cleaner and clear from obstructions. There is minor rust on the block. The casting number is 1002123. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo D13 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust on the exterior of the block. The bolt holes are clean and clear from obstruction. The casting number is 1002133. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used block from a Volvo VE D7 engine. The block has been visually inspected and is in good working condition. The block has no visible damage. There is minor rust and corrosion on the exterior of the block. The bolt holes are clean and clear of obstruction. The casting number is 98432. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used and visually inspected engine block for a INTERNATIONAL 6.0 Ford application. Casting number - 1855638C3 on block and 1855618C3 on main Bearing lower housing. Please see pictures, call or email for more information. WE SHIP ANYWHERE!!! Thank you.

Good, used block from a International Maxxforce 13 engine. The block has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is minor rust on the exterior of the block. The fittings are in good working condition. The casting number is 3012887C3. The engine serial number is unavailable. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.