New and Used Engines & Engine Parts For Sale

This Reconditioned 6V53N Detroit Diesel has be qualified by our Professional Service team. Work performed: -Removed Valve Cover to Perform Valve, Injector & Rack Adjustments -Reconditioned the blower on motor. -Detailed, Installed & Tested operation - Good -Flushed Cooling System with Coolant -Adjusted Valves, Injectors & Rack -Removed Valve Covers -Cleaned & Detailed Valve Covers -Removed Exhaust Manifolds & Cleaned -Resurfaced Manifolds & Detailed -Cleaned Mounting Surface for Manifolds -Replaced Hose between Block & Oil Cooler -Installed Valve Covers -Installed Breather Hose -Removed Air Box Drain Tubes & cleaned -Cleaned Oil from Air Box -Reinstalled Drain Tubes & Fittings -Replaced Hose from Thermostat Housing to Water Pump -Cleaned and inspected engine. -Test Ran Engine- Runs Excellent

This is an Industrial Spec 8V71N Detroit Engine. W/ CLBT 4460-1 ALLIS SN: 2310006828 PT: 6835770 318 hp @ 2,100 rpm (naturally aspirated, 8V-71N) 863 lb-ft @ 1,200 rpm (naturally aspirated, 8V-71N) This Engine Was Rebuilt by Waterous, and Reconditioned Recently by our Engine Experts. This engine has had the bottom end inspected. The top end has been inspected, completed a top end valve set. This engine Has been ran on the floor and is Built for a Rig Application/power unit.

ISX15 HOLSET HE561VE TURBO/ NO ACTUATOR 4955426,4955903,4956011,2881786,2881998 Warranty: ALL claims for warranty on turbos must be accompanied by the following: • engine serial number • copy of install invoice • print out of original failure code(s) & critical events reports • recorded mileage of original failure & claim failure • any other support documentation (i.e. DPF/DOC cleaning invoice for turbo replacement) Failure to produce required documentation will result in possible claim rejection. Disassembly of any assembly sold will result in warranty being void. Failed units and/or cores are not to be disassembled for any reason. Root cause of original turbo failure NEEDS to be diagnosed and repaired prior to new turbo installation. Failure to do so greatly increases risk of premature, non-warrantable, turbo failure! Warranty on all turbos is 1-year from date of installation for manufacturing defects only. It is highly recommended that serial number of units be recorded with each sale for tracking purposes Warranty consideration that is approved will be for parts only, no labour Cores: • Core credit is guaranteed on all turbo assemblies if core is complete. This also applies to cores with cracked housings • Core needs to be returned with all components the replacement unit came with (i.e. all sensors, actuators [if equipped], clamps, etc.) If core is damaged or broken, all pieces that are available need to be returned as well • Core credit will be issued upon receipt of parts • Cores cannot be disassembled • Cores are eligible for return for 90-days from date of sale

HINNO FB/92 TURBO READY TO GO

TURBO WITHOUT VGA ACTUATOR HE451VE 3781369,3796391,3798519,3798515 Warranty: ALL claims for warranty on turbos must be accompanied by the following: • engine serial number • copy of install invoice • print out of original failure code(s) & critical events reports • recorded mileage of original failure & claim failure • any other support documentation (i.e. DPF/DOC cleaning invoice for turbo replacement) Failure to produce required documentation will result in possible claim rejection. Disassembly of any assembly sold will result in warranty being void. Failed units and/or cores are not to be disassembled for any reason. Root cause of original turbo failure NEEDS to be diagnosed and repaired prior to new turbo installation. Failure to do so greatly increases risk of premature, non-warrantable, turbo failure! Warranty on all turbos is 1-year from date of installation for manufacturing defects only. It is highly recommended that serial number of units be recorded with each sale for tracking purposes Warranty consideration that is approved will be for parts only, no labour Cores: • Core credit is guaranteed on all turbo assemblies if core is complete. This also applies to cores with cracked housings • Core needs to be returned with all components the replacement unit came with (i.e. all sensors, actuators [if equipped], clamps, etc.) If core is damaged or broken, all pieces that are available need to be returned as well • Core credit will be issued upon receipt of parts • Cores cannot be disassembled • Cores are eligible for return for 90-days from date of sale

TURBO COMES WITH VGA ACTUATOR 2882015,3769058,2843821,2882112 Warranty: ALL claims for warranty on turbos must be accompanied by the following: • engine serial number • copy of install invoice • print out of original failure code(s) & critical events reports • recorded mileage of original failure & claim failure • any other support documentation (i.e. DPF/DOC cleaning invoice for turbo replacement) Failure to produce required documentation will result in possible claim rejection. Disassembly of any assembly sold will result in warranty being void. Failed units and/or cores are not to be disassembled for any reason. Root cause of original turbo failure NEEDS to be diagnosed and repaired prior to new turbo installation. Failure to do so greatly increases risk of premature, non-warrantable, turbo failure! Warranty on all turbos is 1-year from date of installation for manufacturing defects only. It is highly recommended that serial number of units be recorded with each sale for tracking purposes Warranty consideration that is approved will be for parts only, no labour Cores: • Core credit is guaranteed on all turbo assemblies if core is complete. This also applies to cores with cracked housings • Core needs to be returned with all components the replacement unit came with (i.e. all sensors, actuators [if equipped], clamps, etc.) If core is damaged or broken, all pieces that are available need to be returned as well • Core credit will be issued upon receipt of parts • Cores cannot be disassembled • Cores are eligible for return for 90-days from date of sale

TURBO COMES WITH VGA ACTUATOR 3768268,2843889,4043226,4035678,2881994 Warranty: ALL claims for warranty on turbos must be accompanied by the following: • engine serial number • copy of install invoice • print out of original failure code(s) & critical events reports • recorded mileage of original failure & claim failure • any other support documentation (i.e. DPF/DOC cleaning invoice for turbo replacement) Failure to produce required documentation will result in possible claim rejection. Disassembly of any assembly sold will result in warranty being void. Failed units and/or cores are not to be disassembled for any reason. Root cause of original turbo failure NEEDS to be diagnosed and repaired prior to new turbo installation. Failure to do so greatly increases risk of premature, non-warrantable, turbo failure! Warranty on all turbos is 1-year from date of installation for manufacturing defects only. It is highly recommended that serial number of units be recorded with each sale for tracking purposes Warranty consideration that is approved will be for parts only, no labour Cores: • Core credit is guaranteed on all turbo assemblies if core is complete. This also applies to cores with cracked housings • Core needs to be returned with all components the replacement unit came with (i.e. all sensors, actuators [if equipped], clamps, etc.) If core is damaged or broken, all pieces that are available need to be returned as well • Core credit will be issued upon receipt of parts • Cores cannot be disassembled • Cores are eligible for return for 90-days from date of sale

TURBO WITH VGA ACTUATOR HE551V1 4036720,4043225,3768267,2881993 Warranty: ALL claims for warranty on turbos must be accompanied by the following: • engine serial number • copy of install invoice • print out of original failure code(s) & critical events reports • recorded mileage of original failure & claim failure • any other support documentation (i.e. DPF/DOC cleaning invoice for turbo replacement) Failure to produce required documentation will result in possible claim rejection. Disassembly of any assembly sold will result in warranty being void. Failed units and/or cores are not to be disassembled for any reason. Root cause of original turbo failure NEEDS to be diagnosed and repaired prior to new turbo installation. Failure to do so greatly increases risk of premature, non-warrantable, turbo failure! Warranty on all turbos is 1-year from date of installation for manufacturing defects only. It is highly recommended that serial number of units be recorded with each sale for tracking purposes Warranty consideration that is approved will be for parts only, no labour Cores: • Core credit is guaranteed on all turbo assemblies if core is complete. This also applies to cores with cracked housings • Core needs to be returned with all components the replacement unit came with (i.e. all sensors, actuators [if equipped], clamps, etc.) If core is damaged or broken, all pieces that are available need to be returned as well • Core credit will be issued upon receipt of parts • Cores cannot be disassembled • Cores are eligible for return for 90-days from date of sale

1825690C93 LINER KIT HAS THE FOLLOWING PARTS 1-1815674C1 LINER 1-1825585C2 PISTON 1-1822322C92 LINER SEAL KIT 1-1818552C1 PISTON PIN 1-1825461C92 RING SET 2- SNAP RINGS

qualified ISX EGR valve take off 5411635,5406049,4352302,2881762

PERKINS 4.236 DIESEL ENGINE WATER PUMP FOR BOLT ON PULLEY APPLICATION

3406 TIMING COVER THIS PART IS OBSOLETE FROM FINNING.

QUALIFIED C12 COOLANT MANIFOLD AND THERMOSTAT HOUSING THERMOSTAT HOUSING HAS CAST# 1292886 MANIFOLD HAS # 1314163 HAS A NEW THERMOSTAT

60 SERIES INTAKE MANIFOLD

60 SERIES VALVE COVER

QUALIFIED /REBUILT 60 SERIES AIR COMPRESSOR TF750

NEW TAKE OFF FLYWHEEL OFF A 938 LOADER. 134 TEETH REGROUND LIKE NEW

NT855 EX MANIFOLD SMALL EXHUAST PORT

60 SERIES EXHAUST MANIFOLD

NEW OIL PAN FOR C15 FRO FRONT AND REAR SUMP 2273006,2263004,

50 SEREIES OIL PAN

FAN FOR A JO5E-TP

ENGINE FAN 11BLADE 29.25 2.0 HUB

Cummins Piston for M11 Motors. Composed of Piston Skirt (3081334) and Piston Top (4059901)

Cummins Engine Connecting Rod for 855 Big Cam Engines. Other Part #: 3013930