Used Engine Misc Parts For Sale

Good, used Air Brake Compressor with a fuel pump attached to the Air Brake Compressor that is off a Cummins L-10 engine. The casting number is 3047440-RX. The engine serial number is not N/A. The Air brake Compressor has been inspected and is in good condition. The Air Brake Compressor does have some minor rust in some spots. The attached fuel pump is in good working condition as well. The fuel pump has been inspected and is in good working condition. All the bolt holes are in good shape. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used crankshaft rear seal cover from a Caterpillar C13 engine. The crankshaft rear seal cover has been inspected and is in good condition and ready to be installed. There is no visible damage to the crankshaft rear seal cover. There is little rust on the crankshaft rear seal cover. The casting number on the crankshaft rear seal cover is 160-2323 and the engine serial number is unknown. The holes on the crankshaft rear seal cover are in good condition. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good, used turbo gear box off a Detroit DD15 engine, the part number is A-472-030-05-70. The turbo gear box has been inspected and is in good working condition, it has minor rust in some spots, all the bolt holes look to be in good shape. It does only have 1 bolt holding the top Aluminum housing together, also inside the gear box the teeth are in good condition. The turbo inside the housing spins freely. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used Oil Filter head W/Oil Cooler & Lubricating Oil Filter head off a Cummins L-10 engine. The casting number is 3818909. The engine serial number is N/A. All the bolt holes on the oil filter head is in good shape. The Oil filter head has been inspected and is in good condition. The Lubricating Oil filter that is attached to the oil filter head is in good condition with no damage, it does have some rust but no corrosion. Please see photos and give us a call if you have any questions. Feel free to call or email us. We can ship anywhere! Thank you.

Good used air transfer tube for a Detroit DD15 engine. The air transfer tube is in good condition. There is no visible damage to the air transfer tube. There is little rust on the air transfer tube. The air transfer tube has been inspected and is in good condition and ready to be installed. The serial number for the air transfer tube is A01-25837-000 and the engine serial number is unknown. The holes on the air transfer tube are clean and in good condition. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or e-mail. We ship anywhere! Thank-you!

Good, used steel oil cooler plate cover off a Cummins L-10 engine. The casting number to the oil cooler plater cover is 3819627. The engine serial number is N/A. The steel oil plate cover has been inspected and is in good condition. The oil cooler plate cover does have some minor and corrosion. All the bolt holes are in good shape with no cracks or damage to them. The oil cooler plate cover has a on and off switch valve that seems to be in good working condition. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used Crank case cover off a Detroit DD15 engine, the part number is A-4720110007. The steel crank case cover is in good condition, it does have some surface rust, I do not see any missing pieces, the bolt holes look to be in good shape. The center hole of this crank case cover has been inspected and is in good working condition, also has a plastic inner ring seal that is still in good shape. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used diesel valve mounting bracket off a Detroit DD15 engine, the part number is A-4721500373. The serial number is not visible. This valve mounting bracket is solid with no dents or broken pieces anywhere, its in good condition, also the bolt holes seem to be in good shape. The oval shaped holes are in good shape with no dents or scuff marks, this valve mounting bracket is made in the USA! See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used steel After Cooler off a Cummins L-10 engine. This oil filter cooler has been inspected and there isn't any damage no where. All the bolt holes are in good condition with no damage to them. It is missing 1 top steel plate. The after cooler has 2 small elbow hoses that are in good shape. I don't see any cracks or leaks in the after cooler. The engine serial number is not visible. The casting number is 3821696. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used connecting rod from a Detroit D15 engine. The connecting rod has been inspected an appears to be in good working condition. There is no visible damage to the connecting rod. There is minor rust seen on the connecting rod. There are minor scratches seen on the connecting rod. The part number is R-472-00. The O rings at the bottom of the rod are in good condition, the connecting rod does swivel as it should. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used oil filter housing from a Detroit DD15 engine. The oil filter housing has been inspected and seems to be in good working condition. There is no visible damage to the oil filter housing. I do not see any corrosion on the oil filter housing. In the pictures you will see there are a couple broken pieces that will need repaired. All the bolt holes look to be in good condition. The pully on the outside of the oil filter looks to be in good shape. The part number is A-472-180-72-10. The engine serial number is not available. See photos and give us a call If you have any questions. We can ship anywhere! Thank you.

Good, used fuel rail from a Detroit DD15 engine. The fuel rail has been inspected and seems to be in good working condition. All the threaded inserts are in good shape with no chips or dents. There is no visible damage seen on the fuel rail. There is minor rust seen on the fuel rail. The part number is A-4720780145. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used rear cam cover from a Caterpillar C13 engine. The rear cam cover has been inspected and is in good condition and ready to be installed. There is no visible damage to the rear cam cover. There is a little rust on the rear cam cover. The holes on the rear cam cover are in good condition. The casting number for the rear cam cover is 229-5684 and the engine serial number is unknown. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good , used heater housing off a Cummins L-10 engine. The casting number is 3821854. The engine serial number is N/A. The heater housing has ben inspected and is in good condition. The bolt holes are in good shape, The inside of the heater housing does have some rust and corrosion. It has a threaded plug on the outside of the heater housing that is in good shape with no damage. The heater housing does have some chipped paint peeling off. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used rubber elbow hose off a Cummins L-10 engine. The casting number is 3037626. The engine serial number is N/A. The rubber elbow hose has been inspected and is in good condition. I don't see any cracks in the rubber elbow hose. The rubber elbow hose is clean inside and out. Both connecting ends to the rubber elbow hose are in good shape with no damage. This rubber elbow connected to the intake and turbo. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used Hydraulic Pump off a Cummins L-10 engine. The casting number is V20NF-1011P. The engine serial number is not visible. The Hydraulic pump has been inspected and is in good condition. The hydraulic pump does have minor rust in some spots. The hydraulic pump bolt holes are in good shape with no damage to them. The pulley spins freely underneath the hydraulic pump. It also has 1 threaded hose connector that is in good condition. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used Aluminum seal flange off a Detroit DD15 engine, the part number is A-4720780444. The aluminum seal flange is in good condition, the threaded the bolt holes are in good shape. The serial number is not visible, I do not see any rust or corrosion anywhere. It has some small minor scuff marks. The inside threaded holes have been inspected and they are in good shape. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used thermostat housing from a Detroit DD15 engine. The thermostat housing has been inspected and appears to be in good working condition. There is no visible damage to the thermostat housing. The bolt holes are clear and in good condition. The inside of the thermostat housing is clean. There is minor corrosion and little rust seen on the thermostat housing. The casting number is A-4722030631. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used transmission adapter from a Ford 7.3L engine. The transmission adapter has been inspected and seems to be in working condition. There is no visible damage to the transmission adapter. There is minor corrosion and rust seen on the transmission adapter. The casting number is 1818265C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used oil filter housing for a Cummins N14 engine. The oil filter housing has been inspected and is in good condition and ready to be installed. There is no visible damage to the oil filter housing. There is little rust on the oil filter housing. The casting number is 3070518 and the engine serial number is unknown. The holes on the oil filter housing are in good condition. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good, used air intake filter from a Ford 7.3L engine. The air intake filter has been inspected and seems to be in good working condition. There is minor damage seen on the air intake filter. There is no rust or corrosion seen on the air intake filter. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Fuel Doser Valve off a Unknown year Detroit DD15 engine, the part number is A4600700155. This fuel valve is in good condition besides a couple scuff marks but nothing major. It has a few different harnesses with wiring that look ok. This fuel valve has 3 bolt inlets that are in good shape. The Fuel Doser is made by Bosch and its material is made out of Aluminum, in the pictures you can see that the top 2 plastic pieces have these little prongs that may need replaced. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used oil fill tube from a Ford 7.3L engine. The oil fill tube has been inspected and seems to be in working condition. There is no visible damage to the oil fill tube. There is rust seen on the oil fill tube. There is minor corrosion seen on the oil fill tube. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel injector hold down clamps from an unknown year Cummins ISX15 engine. The clamps do not have any dents or cracks in them. The clamps have been inspected and are in good working condition. Bolt holes are clear and undamaged. No chips or damage done to the clamps. The casting number is 3685567. The engine serial number is 79487075. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used fuel filter housing for a Detroit DD15 engine. The fuel filter housing has been inspected and is in good condition and is ready to be installed. There is no damage to the fuel filter housing. There is little rust on the fuel filter housing but it is still in good condition. The casting number for the fuel filter housing is A 473 090 38 52/001 and the engine serial number is unknown. Please see the attached photos and if you have any further questions please feel free to contact us either by phone or by e-mail. We ship anywhere! Thank-you!