New and Used Kenworth (Truck Make) For Sale

used, have different off sets 140-190$, good codition

2023 FULLER EEO-17F112C Transmission, came out of the truck with 500 MILES ONLY, LIKE NEW CONDITION

Good, used STEEL PACCAR CROSSMEMBER from a 2015 Kenworth T680 truck. The Paccar crossmember casting numbers are A24 6256 REV A, 20550AB and J000210085. This steel Paccar crossmember has been inspected and there are 2 bolts that broke during tear town but it appears to be in good used working condition. Please take a look at all the attached photos. Feel free to call or email us with any questions or concerns. WE SHIP ANYWHERE AROUND THE WORLD!!! Thank you for looking at our part.

Good, used STEEL PACCAR CROSSMEMBER from a 2015 Kenworth T680 truck. The Paccar crossmember casting numbers are A24-6257 REV A, 20550AB and 0128. This steel Paccar crossmember has been inspected and it appears to be in good used working condition. Please take a look at all the attached photos. Feel free to call or email us with any questions or concerns. WE SHIP ANYWHERE AROUND THE WORLD!!! Thank you for looking at our part.

Used passenger door in fair condition from a 1984 Kenworth W900 truck. All of the interior trim of this door is missing, as is the window regulator. The latch and lock are present and appear to be in working condition. The vent window also works well. Hinge is stiff, but still working. The very top section is broken, but is likely still usable. There is a nice chrome rain vent along top of window. See photos and feel free to call or m message us if you have any questions. We can ship Anywhere! Thank you.

Good, used drivers side power window and mirror control panel from a 2017 Kenworth truck. The window switch has been visually inspected and is in good working condition. The widow switch has very minor damage to one of the buttons, refer to photos. The contacts are straight and clear from corrosion. The mounting clips are in good working condition. The casting number is 32473-1202A. The engine serial number is unavailable. Please see photos and feel free to call or e-mail us if you have any questions. We can ship Anywhere! Thank you.

Good, used Temperature control panel from a 2020 Kenworth T880 truck. the temperature control panel has been visually inspected and is in good working condition. The temperature control panel has no visible damage. The contacts are straight and clear from corrosion. The mounting clips are in good working condition. The knobs rotate freely. The casting number is F21-1028-1391 N. the truck serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Dash panel from a 2017 Kenworth T880 truck. The panel has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstructions. there is minor dent on the panel, please refer to photos. The casting number is S18-1026-000. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Dash panel from a 2017 Kenworth T880 Truck. The panel has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstructions. There is not visible damages. The casting number is S18-1030-0. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used temperature control panel from a 2019 Kenworth T880 truck. The temperature control panel has been visually inspected and is in good working condition. The knobs rotate freely and the contacts are in good working condition. The clips for mounting are intact and in good working condition. The casting number is F21-1028-1381. The truck serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Dash panel from a 2018 Kenworth T880 Truck. The panel has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstructions. There is not visible damages. The casting number is S18-1031-0171721.The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Dash panel from a 2020 Kenworth T880 truck. The panel has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstructions. there is minor dent on the panel, please refer to photos. The casting number is S18-1032-171721. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used aluminum battery box off a 2015 Kenworth T680 truck, part number is not visible. This battery box is in good condition, the two outer brackets that bolt down to the truck frame are secure and tight. It has a plastic guard shield that is attached well, on the bottom side it has a rubber seal that is coming off but can easily be fixed. The inside box where the batteries go are in good condition also. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used battery box from the driver side of a 2000 Kenworth T600 truck. Box is 31" wide by 16" deep in the battery compartment (20" deep total, with brackets) and holds up to four batteries, though the inner framing is good for just three batteries. One side holds closed with a nut on the stud, the other side's stud is broken off. See photos and feel free to call or email us for a quote that includes your freight cost. We can ship anywhere! Thank you.

Good used Steer Axle from a 2015 Kenworth T 680 truck. Dana Spicer model E1322, and casting number is 971426. Air brake chambers are all intact and included, and there appears to be a lot of life left in the brake shoes. The drag link had been cut, but the steering knuckle is good. See photos and feel free to call or email with any questions. We can ship Anywhere! Thank you.

Used ignition switches from a 1984 Kenworth W900 truck. The ignition switches have been inspected and seem to be in good working condition. The switches are in good condition and can move easily. Fog light, spare, Engine brakes, mirror heat, air TK heat, engine preheat, fuel TK heat, start aid, and engine fan switches. Windshield wiper dials are also on the cluster. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Used ignition switches from a 1984 Kenworth W900 truck. The ignition switches have been inspected and seem to be in good working condition. The switches are in good condition and can move easily. The ignition is in good condition. Key turns all the way smoothly. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used ALUMINUM PACCAR FRAME HORN from a 2015 Kenworth T680 truck. The Paccar frame horn casting numbers are B11-1025 REV B, 04088CA, 10009783, CM1 02 and PM 08. This aluminum Paccar frame horn has been inspected and it appears to be in good used working condition. Please take a look at all the attached photos. Feel free to call or email us with any questions or concerns. WE SHIP ANYWHERE AROUND THE WORLD!!! Thank you for looking at our part.

Good, used Driver's side PACCAR Def tank off a 2015 Kenworth T680 truck, part number is M86617000304. The Def tank is in good condition, the 2 brackets that keep the def tank in place are secure and tight. The wiring harness seems be attached well with no loose connections, the inlet hole where the def fluid is put into tank is clean with no dents. The Def fuel cap is broken that will need replaced. See photos and give use a call if you have any questions. We can ship Anywhere! Thank you. - Air/Hydraulic: N/A

Good, used connection rod from a 2015 PACCAR MX13 engine. The connection rod has been inspected and is in good working condition. There is no visible damage seen on the connection rod. There is minor rust seen on the connection rod. Bolt holes are clear and in good condition. The casting number is 1940353. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Used hydraulic tank, with control valve and cooling radiator with fan, removed from a 2000 Kenworth T600 truck. Hydraulic application is unknown, but the valve appears to be a three way. Center being off, left being one direction and right being the opposite direction. There is a level sight gauge and it is rather cloudy. See photos and feel free to call or email us for a quote that will include shipping to you. We can ship Anywhere! Thank you.

Good, used wiring harness from a 2015 PACCAR MX13 engine. The wiring harness has been inspected and is in good working condition. There is no visible damage seen on the wiring harness. There is no rust seen on the wiring harness. Bolt holes and threads are in good condition. The casting number is 1625018. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel injector from a 2015 PACCAR MX13 engine. The fuel injector has been inspected and is in good working condition. There is no visible damage seen on the fuel injector. There is minor rust seen on the fuel injector. Threads are in good condition. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Used tank fairing from the passenger side of a 2000 Kenworth T600 truck. Plastic and gray, this part is mostly intact, however there are pieces broken off at the bottom, where the step would be located. Step location is 23" wide by 5" deep. See photos and feel free to call or email us for a quote that will include shipping costs to you. We can ship anywhere! Thank you.

Good, used valve cover from a 2015 PACCAR MX13 engine. The valve cover has been inspected and is in good working condition. There is no visible damage seen on the valve cover. There is very little corrosion on the valve cover. Bolt holes are clear and in good condition. The casting number is 1885471. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!