New And Used Truck Parts For Sale

Nice accessory / tool box from the passenger side of a 2001 Western Star 9400E truck. See picture for mounting display. This box sits behind the fuel tank and the rear of the cab. Unit is just over 18" in width and the three steps are 18" wide. Unit is 23" tall overall. Steel mounting bracket in rear of box is 27" wide. Box is spacious and secure. The latch and weatherstripping are in excellent condition. We don't have a key for the lock, but that is easy to replace. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you for looking.

Good, used Def Tank off a 2016 International DURASTAR 4300 Cummins engine. The casting number is 399887C93. The engine serial number is N/A. The Def tank has been inspected and is in good condition. The def fluid cap in good shape with no damage. The steel frame that holds the def tank together is rusty but still secure. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you. - Air/Hydraulic: Air/Hydraulic

Good used PLASTIC DEF TANK/ SENDING UNIT WITH BRACKETS from a 2014 Peterbilt 587 truck. This DEF tank fits the drivers side. The casting numbers are M86-6168 00102 REV D. Chassis number is 211844. Sequence number is P2023FO. This DEF tank/ sending unit and brackets have been inspected and the cap is missing but it appears to be in good used condition. Please see all the attached photos. WE SHIP ANYWHERE !!! Thank you. - Air/Hydraulic: Air/Hydraulic

Good, used driver side DEF tank from a 2016 Peterbilt 579 truck. The DEF tank is in good working condition. The tank is center fill. The DEF tank cap is attached and in good working condition. There are two inlets on the back of the tank, refer to photos. The mounting brackets are attached and in good working condition. The casting number is not visible.Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Driver's side Def tank off a unknown year truck, the part number and casting numbers are not visible. The Def tank is in good condition, the Def tank has a full solid black bracket that mounts around the hole tank, the bracket does have rust on it. The bracket is secure and tight. The wiring harness seems be attached well with no loose connections, the inlet hole where the def fluid is put into tank is clean with no dents. The Def fuel cap is missing and will need replaced. See photos and give use a call if you have any questions. We can ship Anywhere! Thank you. - Air/Hydraulic: N/A

Good, used PLASTIC DEF TANK ASSEMBLY WITH BRACKETS. The part number is M86-6053-01304. Chassis number is 174247. This tank has a capacity of 25.3 Gallons. This DEF tank assembly has been inspected it appears to be in good used condition but there is some rust on the bracket and the fill cap and overflow cap are missing. Some of the hoses and wires will need to be replaced also. Please see all the attached photos. Call or email us with any questions. WE SHIP ANYWHERE!!! Thank you - Air/Hydraulic: Air/Hydraulic

Good, used DEF tank from a 2015 Peterbilt 579 truck. The DEF tank is plastic. There is no visible damage to the DEF tank. The DEF tank harness is in good working condition. the tank cap is attached and is in good working condition. The DEF tank has minor rust. The casting number is not visible. The serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Driver's side PACCAR Def tank off a 2015 Kenworth T680 truck, part number is M86617000304. The Def tank is in good condition, the 2 brackets that keep the def tank in place are secure and tight. The wiring harness seems be attached well with no loose connections, the inlet hole where the def fluid is put into tank is clean with no dents. The Def fuel cap is broken that will need replaced. See photos and give use a call if you have any questions. We can ship Anywhere! Thank you. - Air/Hydraulic: N/A

Good, used DEF tank from a 2019 Freightliner Cascadia 126 truck. The DEF tank has been visually inspected and is in good working condition. The DEF tank harness is in good working condition. The fill cap is in good working condition. There are 2 inlets visible on the DEF tank. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used door from a 2009 Chevrolet Express truck. The door has been visually inspected and is in good working condition. The door has minor rust around the mirror. There is no visible damage to the door. The door card is in good working condition. The door handles and the manual roll up with is in good working condition. The door is missing part of the hinges. The casting number is not visible. The truck serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used passenger side door from a International 4300 truck. The doors have been visually inspected and in good working condition. The door has no visible damage. The door has a manual window that does roll up and down. The mirrors are in good working condition. The door card is in good working condition, There is no cracks or damage to the door card. The hinges are attached and in good working condition. There is no visible rust on the door. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Passenger side door off a 2016 International DURASTAR 4300 truck. The casting number is not visible. The engine serial number is N/A. The door has been inspected and is in good condition. The top mirror bracket is broke and it is missing the mirror also. The manual pop out window is in good shape with no damage. The manual crank handle to the window is in good shape with no damage. The door handle and door hinges are in good condition with no damage. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used Passenger Side Door off a 2006 Freightliner M2-106 in good condition. The casting number is not visible. The passenger side door has been inspected and is in good condition. The passenger side mirror is in good condition with no damage seen anywhere. It does have some minor paint chips in certain spots but nothing major. The bracket hinges are in good shape. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used driver side door from a 1995 International 9400 truck, The door has been visually inspected and is in good working condition. There is no visible damage to the door. The door has a minor dent on the bottom of the door. There mirror is in good working condition. The interior panel on the door is pulling away at the bottom , refer to photos. Please see photos and give us a call or e-mail if you have any further questions. We can ship anywhere! Thank you!

Good, used Passenger side door off a 1993 White WIAAREO SERIES truck. The door has been inspected and is in good working condition with only a couple flaws. The inside handle that rolls up and down the window is missing. The 2 door hinges are secure and have no damage. Both inside and outside door latches that open the door is in good shape. The mirror is also secure with no damage. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used passenger side door from a 2005 Freightliner M2 106 truck the door has been visually inspected and is in good working condition. The door has minor damage on the exterior above the window, refer to photos. the mirror is not attached to the door. The paint is in good condition. The door card is in good working condition. The window rolls up and down. The hinges are in good working condition. The casting number is not visible. The truck serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used passenger side door from a 2004 freightliner M2 106 truck. The door has been visually inspected and is in good working condition. The door has no visible paint chipping or rust. The door card is in good working condition. The door handles and manual window handle are all intact with no visible damage. There is minor damage to the aluminum bracket that holds the mirror, refer to photos The window rolls up and down. The weather stripping on the exterior of the door is starting too peel. The casting number is not visible. The truck serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used driver side door from a 2009 Chevrolet Express van. The door has been visually inspected and is in good working condition. The door has no visible damage. The door card has a minor crack, refer to photos. The door handles on both sides are in good working condition. The manual window handle is in good working condition, The window rolls up and down. The hinges are in good working condition. There is no visible damage to the door. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used aluminum fuel tank off a 2012 Peterbilt 386 truck, part number is not visible. The fuel tank is in good condition, It does have a couple of small dents on the bottom left side of tank. The 2 black aluminum brackets are fastened and secure around the tank. The fuel cap and lock latch are in great shape, fuel tank is clean on the inside. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Used passenger side fuel tank off a 2006 VOLVO VNL. 125 GAL. CAP. and fill is on left side. Dimensions are - L56.5" X L26". Please see pictures, call or email for more information. WE SHIP ANYWHERE!! thank you. Update 5-26-2020: Fresh Powerwash. See new photos as well.

Used Take Off. Looks Great! Frieghtliner Cascadia Guage Assembly. 22-60660-001, 06-61988-001, 06-60973-000, K024929, A22-71046-102, A22-71047-106, A22-66343-001, 3270-3, 3270-11, 3270-2, 3270-1A Don't see what you need? We are glad to help! Just give us a call or email.

Good used Instrument Cluster off a 2005 Blue Bird International C7 Caterpillar bus, the number is 0060622. This 2005 cluster is in good condition, it has all its wiring and harnesses and ready for hook up. The back side of the control panel where all the wiring is seems to be all their and secure, the front display with gages and push buttons seem in good condition, their is a crack on the plastic where the cruise control button is but will not affect how it works which you can see in the pictures below. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used DPF assembly 2016 INTERNATIONAL PROSTAR . The DPF has been visually inspected and is in good condition. There is no visible damage seen on the DPF. There is minor corrosion seen on the DPF tank. The wiring looks to be in good condition. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used DPF filter assembly from a 2015 Peterbilt 579 truck. The DPF filter system has been visually inspected and is in good working condition. The DPF system has minor rust and corrosion. There are 2 inlets on the DPF system. The harness is in good working condition. There are steps on the DPF system. The casting number is 4329284. the serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Inspected Differential from 2013 International 4300 make is Meritor/Rockwell model is MS1714X .Ratio is 5.57 casting number 3200-K-1676 Comes with 90 day warranty. The differential has been inspected and is in good working condition with no visual damage. The non threaded bolt holes are clean and smooth with no damage. Please see photos call or email with any questions. WE SHIP ANYWHERE!!! - Differential Make: Meritor/Rockwell - Differential Model: MS1714X

Good, used ABS ECM from a International DuraStar 4300 from an unknown engine. The ABS ECM has been visually inspected and is in good working condition. The ABS ECM has no corrosion. All bolt holes are clean and clear. The Bracket holes are slightly bent on the ABS ECM. The casting number is 10R-046739. The engine serial number is unavailable. .Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used intake manifold from a Volvo VED12 engine. The intake manifold has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on manifold. There is minor corrosion around the manifold, please refer to photos. The fittings are in good working conditions. The casting number is 20760108. The engine serial number is D12513148D2AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used intake manifold from an International VT365 engine. The intake manifold has been visually inspected and is in good working condition. There is no visible damage on the intake manifold. The bolt holes are clean and clear from obstruction. The fittings are clear from obstruction and in good working condition. The contacts attached to the intake manifold are free from damage and in good working condition. There is rust, corrosion and paint chipping on the manifold, please check the pictures provided. The casting number is 1843333C3. The engine serial number is 6VNXHO365AEC. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used inlet Manifold from a Caterpillar C7 engine. The inlet manifold has been inspected and appears to be in good working condition. There is no visible damage to the inlet manifold. The bolt holes are clear and in good condition. The casting number is 116-5406. The engine serial number is KAL48145. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used intake manifold with intake valve from an International Maxxforce DT466 engine. The intake manifold has been visually inspected and is in good working condition. There is no visible damage to the intake manifold. There is minor rust seen on the manifold. The bolt holes are clear and in good condition. The casting number is 1850558C1. The engine serial number is 466HM2U3074202 . Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used steering column shaft from a Freightliner Cascadia 126 truck. The steering column shaft has been visually inspected and is in good working condition. There is no visible damage on the shaft. The bolt holes are clean and clear from obstruction. The steering shaft rotates, expands and retracts with no complication. There is minor rust and corrosion around the steering shaft, please check the pictures provided. The casting number is 14-19607-000. The engine serial number is not available. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used power steering reservoir from a Ford 7.8L engine. The power steering reservoir has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the power steering reservoir. The bracket from power steering reservoir is in good working condition. There is minor corrosion around the power steering reservoir, please refer to photos. The casting number is E8HT-3531-CB The engine serial number is HFMO78FPA3-DI. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you.

Good, used injector harness from a International Maxxforce DT466 engine. The injector harness has been visually inspected and is in good working condition. All contacts are straight and not corroded. The casting number is not visible. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used timing gear cover from a Cummins ISB 220 engine. The timing gear cover has been inspected and is in good working condition. There is no visible damage seen on the timing gear cover. There is some paint chipping and minor corrosion seen on the timing gear cover. The casting number is 3974966 .The engine serial number is 8CEXH0408BAC. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine mount from a Cummins N14 engine. The engine mount has been inspected and is in good working condition. There is no visible damage seen on the engine mount. There is minor rust seen on the engine mount. The casting number is 1664765C4. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used front engine mount from a Cummins N14 engine. The front engine mount has been inspected and is in good working condition. There is no visible damage seen on the front engine mount. There is rust seen on the front engine mount. The casting number is 1664765C4. The engine serial number is 11932048. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rear engine mount from a Cummins 220 engine. The rear engine mount has been inspected and seems to be in good working condition. There is damage around one of the bolt holes. There is no other visible damage seen on the rear engine mount. There is rust seen on the rear engine mount. The casting number is 01-30509-001. The engine serial number is 8CEXH0408BAC. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rear engine mount from a Cummins 220 engine. The rear engine mount has been inspected and seems to be in good working condition. There is not damage around one of the bolt holes. There is no other visible damage seen on the rear engine mount. There is rust seen on the rear engine mount. The casting number is 01-30509-000. The engine serial number is 8CEXH0408BAC. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used exhaust manifold from an International DT466 engine. The exhaust manifold has been visually inspected and is in good working condition. There is no visible damage on the exhaust manifold. The bolt holes are clean and clear from obstruction. The fittings are damage free and in good working condition. There is rust and corrosion on the manifold, please check the pictures provided. The casting number is 1850748C2. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used exhaust manifold from an International Maxxforce DT 466 engine. The exhaust manifold has been inspected and is in good working condition. The bolt holes are unobstructed. There is minor rust is seen on the exhaust manifold. The casting number is 1850748C1. The engine serial number is 2U3041849. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used exhaust manifold from a International Maxxforce DT466 engine. the exhaust manifold has been visually inspected and is in good working condition. The exhaust manifold has minor rust. All bolt holes on the exhaust manifold are clean and clear of obstruction. The casting number is 1850748C2. The engine serial number is 466HM2U3056192. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used tank fairing from a 2011 International Prostar truck. The tank fairing has been visually inspected and is in good working condition. The tank fairing has a few minor cracks. The tank fairing has minor paint chipping. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Passenger Side Tank Fairing off of a 1999 International 9200 truck. The tank fairing has been visually inspected and appears to be in good working condition. There is some minor scratches and scuff marks seen on the tank fairing. There is also some minor plastic pieces that are broken off that you can see in the photos. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, Used fan with hub from a International DT466 engine. The fan has been visually inspected and is in good working condition. The fan has no scratches or cracks in the fan. The fan hub has minor corrosion. The threads on the fan are in good working condition. There is no visible damage to the fan. The casting number is PA6-GF33. The engine serial number is 466HM2U3073309. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fan blade with hub from a International Maxxforce DT466 engine. The fan has been visually inspected and is in good working condition. The fan has minor scratches on the fan blade. The fan hub has minor corrosion. The casting number is 6-GF33. The serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, Used fan with hub from a International Maxxforce DT466 engine. The fan has been visually inspected and is in good working condition. The fan has no scratches or cracks in the fan. The fan hub has minor corrosion. The threads on the fan are in good working condition. There is no visible damage to the fan. The casting number is PA 6-GF33. The engine serial number is 466HM2U3056192. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fan blade with hub from an International Maxxforce DT 466 engine. The fan blade has been visually inspected and is in good working condition. There is minor visible damage to the fan blade.There is minor corrosion seen on the fan blade. The casting number is 3609117C2. The engine serial number is 9NVXH0966AGC . Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fan blade with hub from a International Maxxforce DT466 engine. the fan has been visually inspected and is in good working condition. The fan has minor scratches on the fan blade. The fan hub has minor corrosion. The casting number is 6-GF33. The serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used air filter housing from a 2003 Volvo VNL truck. There is no visible damage to the air filter housing. There are no cracks or damage seen on the air filter housing. Casting number is 20411815.Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used ALUMINUM BATTERY BOX WITH 2 ALUMINUM STEPS AND A STEEL AIR TANK WITH MOUNTING BRACKETS that came off a 2014 Peterbilt 587 truck. The top step measures 33 1/2" long by 7" deep. The bottom step is 30 1/2" long by 7" deep. The air tank measures 33" long with a 9" diameter. This battery box, steps, air tank and brackets have been inspected and the bottom of the step brackets is bent and one of the tank brackets is broken but it appears to be in good used condition. Please see all the attached photos. WE SHIP ANYWHERE!!! Thank you.

Good, used driver side battery box from a 2011 International Prostar truck. The battery box has been visually inspected and is in good condition. The battery box is seen to have minor rust. The casting number is not visible. Please see photos and give us a call if you have any questions. We can ship anywhere! Thank you. NO TOP

Good, used Battery Box from a 2010 IC Corporation PB205 truck. The casting number is not visible. The battery box is in good condition with no damage. The front mounting brackets are in good shape. The battery box does have some rust on it which you can see in the photos. The black metal brackets that hook from the battery box are secure and tight, the 4 metal anchor clamps that hold the 2 air tanks in place are in great shape. the 2 air tanks seem to to be in good condition and very well attached with no loose bolts. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used Battery Box off a 2010 Peterbilt 386 truck, part number is not visible. The black brackets that attach to the box are very secured and fastened tight, the 2 metal anchors that hold the air tank to the battery box are held together very secure. The positive and negative battery cables are still in good condition, the door and latch all seem to work properly. Both top and bottom aluminum steps are in good condition See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used tool storage box off a 2012 Peterbilt 386 truck, part number is not visible. The storage tool box is in good condition, the front mounting bracket is bent on the left side of tool box. The black metal brackets that hook from the tool box are secure and tight, the 4 metal anchor clamps that hold the 2 air tanks in place are in great shape. the 2 air tanks seem to to be in good condition and very well attached with no loose bolts. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used driver side steel battery box with an aluminum lid from a 1998 Mack MR688S truck. The battery box has been inspected and is in good condition. The battery box has minor rust seen on it. The latch has no visible damage. There is minor damage seen on the box, refer to photos. The casting number is not visible. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used engine bracket from a Cummins ISL engine. The bracket has been visually inspected and is in good working condition. There is no visible damage to the engine bracket. There is minor rust seen on the engine bracket. The bolt holes are clear and in good condition. There is minor paint chipping on the bracket. The casting number is 4939768. The serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used alternator bracket from a Ford 7.8L engine. The alternator bracket has been visually inspected and is in good working condition. The alternator bracket has minor corrosion. All bolt holes are clean and clear from obstructions. There is not visible damage on the mountain bracket. The alternator bracket casting number is FIHT-9C476-C8. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used high pressure oil rail from an International DT466 engine. The high pressure oil rail has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The fittings are clear from damage and in good working condition. The contact attached has received damage, please check the pictures provided. There is rust and corrosion on the oil rail. The casting number is 1832477C3. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used oil filter base with oil cooler attached from an International DT466 engine. The oil filter bas has been visually inspected and is in good working condition. There is no visible damage on the oil filter base. The oil cooler attached has some damage on it, will be shown in pictures. The bolt holes are clean and clear from obstruction. The fittings are damage free and in good working condition. There is rust and corrosion on the oil filter base, please check the pictures provided. The casting number is 1841989C3. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used oil dip stick from a Caterpillar 3208 engine. The oil dip stick has been visually inspected and is in good working condition. There is not visible damage on oil dip stick. There is minor rust on the outside of dip stick. There is minor corrosion around the dip stick tube. There is minor paint chipping refer to photos please. The casting number is 9N6651. The engine serial number is 32487890. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used heated fuel filter assembly from an International Maxxforce DT466 engine. The fuel assembly has been visually inspected and has no damage.The assembly has minor corrosion. The casting number is 1873932C94 .The engine serial number is 466HM2U3056192. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine pulley from a Caterpillar C12 engine. The pulley has been visually inspected and is in good working condition. There is minor rust on the pulley. There is minor damage seen on the pulley, please refer to photo. The casting number is 132-3162. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used high pressure oil rail from an International Maxxforce DT466 engine. The high pressure oil rail has been visually inspected and is in good working condition. There is minor corrosion seen on the high pressure oil rail. The bolt holes are clear and in good condition. The casting number is 1832477C3. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crankshaft adapter from an International Maxxforce DT466 engine. The crankshaft adapter has been visually inspected and is in good working condition. There is minor visible damage to the crankshaft adapter. There is rust seen on the crankshaft adapter. The casting number is WDI12. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel filter base from a Caterpillar C7 engine. The fuel filter base has been visually inspected and is in good working condition. There is no visible damage to the fuel filter base. There is minor corrosion seen on the fuel filter base. The casting number is 141-5138. The engine serial number is KAL48145. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil pick up tube from an International Maxxforce DT466 engine. The oil pick up tube has been visually inspected and is in good working condition. There is no visible damage on the oil pick up tube. The bolt holes are clear from damage and in good working condition. The mesh guard has no visible damage and is in good working condition. There is rust and corrosion on the pick up tube, please check the photos provided. The casting number is 1840124C1. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used flywheel adapter ring from an International Maxxforce DT466 engine. The adapter ring has been visually inspected and is in good working condition. There is no visible damage on the adapter ring. The bolt holes are clean and clear from damage. There is rust and corrosion on the adapter ring, please check the pictures provided. The casting number is 3585126C1. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used crankcase breather from an International Maxxforce DT466 engine. The crankcase breather has been inspected and is in good working condition. There is no visible damage to the crankcase breather. The bolt holes are clear and in good condition. The casting number is 580105. The engine serial number is 2U3041849. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel filter assembly from an International DT466 engine. The fuel filter assembly has been visually inspected and is in good working condition. The contacts attached are free from damage and in good working condition. The bolt holes are clean and clear from obstruction. The fittings are in good working condition and free from damage. There is corrosion around the fuel filter assembly, please check the pictures provided. The casting number is 1873932C94. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used pushrod from a Caterpillar C7 engine. The pushrod has been isually inspected and is in good working condition. There is no visible damage to the pushrod. There is minor corrosion seen on the pushrod. The casting number is 133-6379. The engine serial number is KAL48145. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil manifold from an International DT466 engine. The oil manifold has been visually inspected and is in good working condition. There is no visible damage to the oil manifold. There is minor corrosion seen on the oil manifold. The fitting is in good working condition. The bolt holes are clear and in good condition. The casting number is 1832479C3. The engine serial number is 3042036. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used coolant manifold from a Caterpillar C7 engine. The coolant manifold has been visually inspected and is in good working condition. There is no visible damage to the coolant manifold. There is minor corrosion on the coolant manifold. All bolt holes are clean and clear from obstruction. The casting number is 131-4163. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used thermostat housing from a Caterpillar C12 engine. The thermostat has been visually inspected and is in good working condition. There is no visible damage to the thermostat housing. There is minor corrosion on the thermostat housing. All bolt holes are clean and clear from obstruction. The casting number is 129-2886. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel filter assembly from a International Maxxforce DT466 engine. The fuel filter has been visually inspected and has minor damage. The fuel filter has minor corrosion. the fuel filter has a crack in one of the bolt holes, refer to photos. The casting number is 1873932C95. the engine serial number is 466HM2U3082538. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used high pressure oil rail from an International Maxxforce DT466 engine. The high pressure oil rail has been inspected and is in good working condition. There is no visible damage to the high pressure oil rail. The bolt holes are clear and in good condition. The casting number is 1832477C3. The engine serial number is 2U3041849 . Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crankcase breather from an International Maxxforce DT466. The crankcase breather has been visually inspected and is in good working condition. There is no visible damage to the crankcase breather. There is minor corrosion seen on the crankcase breather. The casting number is 580105-01 . The engine serial number is 466HM2U3082538. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel filter housing from an International Maxxforce DT 466 engine. The fuel filter housing has been visually inspected and is in good working condition. There is no visible damage to the fuel filter housing. There is minor corrosion seen on the fuel filter housing. The casting number is 1873932C94 . The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel adapter from an International Maxxforce DT 466 engine. The flywheel adapter has been visually inspected and is in good working condition. There is no visible damage to the flywheel adapter. There is rust seen on the flywheel adapter. The casting number is 1829996C1. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used high pressure oil rail from an International Maxxforce DT466 engine. The high pressure oil rail has been inspected and is in good working condition. There is no visible damage to the high pressure oil rail. The bolt holes are clear and in good condition. The casting number is 1832477C3. The engine serial number is 466HM2U3083005 . Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover from a Mercedes MBE 926 engine. The valve cover has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the valve cover. The fittings are in good working condition. There is some paint chipping around the cover along with some labels that are peeling off, please refer to photos. The contact has no visible damage and is in good working condition. The engine oil cap is in good working condition and has no visible damage. The casting number is A9260100530. The engine serial number is 7DDXH7.20DJA. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover from a Volvo VED12 engine. The valve cover has been visually inspected and is in good working condition. There is no visible damage on cover. The bolt holes are clean and clear from obstruction. There is minor corrosion around the cover, please refer to photos. The fitting is in good working condition. The casting number is 3964996. The engine serial number is D12513148D2AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover from an International Maxxforce DT466 engine. The valve cover has been visually inspected and is in good working condition. There is no visible damage seen on the valve cover. There is minor corrosion seen on the valve cover. The casting number is 1875851C1. The engine serial number is 466HM2U3082538. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used POWER STEERING PUMP from a Cummins ISB 220 engine. The POWER STEERING PUMP has been visually inspected and is in good working condition. There is no visible damage on the POWER STEERING PUMP. There is minor corrosion on the POWER STEERING PUMP. The POWER STEERING PUMP casting number is 14-16361-000. The serial number is 8CEXH0408BAC. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you

Good, used steering pump from an International Maxxforce DT466 engine. The steering pump has been visually inspected and is in good working condition. There is no visible damage on the steering pump. The bolt holes are clean and clear from obstruction. The pump's gear has no visible damage and is in good working condition. The fittings are damage free and in good working condition. There is minor rust and corrosion on the steering pump, please check the photos provided. The casting number is 200818C93. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used power steering pump from an International Maxxforce DT 466 engine. The power steering pump has been visually inspected and is in good working condition. There is no visible damage seen on the power steering pump. There is minor corrosion seen on the power steering pump. The casting number is VT73Z. The engine serial number is 466HM2U3082538. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine brake from a Caterpillar C12 engine. The engine brake has been visually inspected and is in good working condition. There is minor rust on the engine brake. All bolt holes on the engine brake are clean and clear of obstruction. The casting number is 021078. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used break control valve from a Volvo VED12 engine. The break control valve has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on control valve. The connect is in good working condition. The casting number is 20556016. The engine serial number is D12513148D2AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used timing gear from an International Maxxforce DT 466 engine. The timing gear has been visually inspected and is in good working condition. There is no visible damage on the timing gear. The gear teeth are in good condition. There is no rust on the timing gear. The timing gear spins freely. The casting number is 1824635C1. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used glow plug control module from a International Maxxforce 7 engine. The glow plug control module has been visually inspected and is in good working condition. There is no visible damage on the glow plug control module. The bolt holes are clean and clear from obstruction. The contacts attached are in good working condition and free from damage. Part of the mount attached is broken. The casting number is 1828565C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Used Take Off. Looks Great!! Freightliner Cascadia Guage Assembly. A22-60566-121, A06-84379-120, A22-71046-103, A22-71046-105, A22-71047-100, A22-71047-101, A22-71046-101, A22-71046-100 Don't see what you need? We are glad to help! Just give us a call or email.

Good used driver door window, professionally removed from a damaged door of a 2017 Peterbilt 579 truck. There is a little bit of normal wear and scratching from the up and down use of the window, but it has been clean and there is now damage. This is stored in cardboard and set aside for protection. See photos and call or email our sales staff for a quote. We can ship Anywhere! Thank you for looking.

Good, used Steel Air Dryer from a 2009 Peterbilt 382 engine. The casting number is 1A2319T. The engine serial number is unavailable. The steel air dryer has been visually inspected and is in good condition. The air dryer has 3 valve lines that are in good condition. The air dryer has a steel bracket that is connected to it. The steel bracket is seen to have minor rust on it. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used front timing gear cover from an International Maxxforce DT 466 engine. The front timing cover has been visually inspected and is in good working condition. There is no visible damage seen on the timing cover. There is minor corrosion seen on the cover. The bolt holes are clear and in good condition. The casting number is 1879185C1. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used HOOD SHOCK WITH MOUNTING BRACKET from a 2014 Peterbilt 587 truck. This shock/bracket fits the drivers side. The casting numbers are L71-6005 REV B, 21494AA, L85-6085, 05315AO REV A and 234. This hood shock and bracket have been inspected and is in good used condition. Please see all the attached photos. Call or email us with any questions. WE SHIP ANYWHERE!!!!

Good, used HOOD SHOCK WITH MOUNTING BRACKET from a 2014 Peterbilt 587 truck. This shock/bracket fits the passenger side. The casting numbers are L71-6004 REV C, 21494AA, L85-6085R and 05315AD REV A. This hood shock and bracket have been inspected and is in good used condition. Please see all the attached photos. Call or email us with any questions. WE SHIP ANYWHERE!!!!

Used water pump core from a Cummins N14 engine. There is minor visible damage to the water pump. There is minor rust on the water pump core. The main wheel does not turn. The casting number is 3078523. The engine serial number is 11677183. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used water pump from a Caterpillar C12 engine. The water pump has been visually inspected and is in good working condition. The water pump gear spins freely. There is minor rust on the water pump. All bolt holes are clean and clear from obstruction. The casting number is 0R0705. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil cooler assembly from a Caterpillar C12 engine. The oil cooler has been visually inspected and is in good working condition. There is no visible damage to the oil cooler. There is minor rust seen on the oil cooler. The casting number is 1260062. The engine serial number is 2KS28160. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil cooler with base from a International Maxxforce DT466 engine. The oil cooler has been visually inspected and is in good working condition. The oil cooler has minor corrosion. All bolt holes on the oil cooler are clean and clear from obstruction. The casting number is 1842418C. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used belt tensioner from an International DT466 engine. The belt tensioner has been visually inspected and is in good working condition. There is no visible damage on the belt tensioner. The bolt hole is clean and clear from obstruction and in good working condition. The pulley attached is in good working condition and damage free. There is rust and corrosion on the belt tensioner. The casting number is 38634. The engine serial number is 3042036. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!